Add WeChat
Guangxi South Light Axle Auto Parts Co., LTD. : What are the types of automobile axle (12)
Summary：Two hub bearings are mounted on the knuckle journal to support the hub; The inner hole wall of the k....
Two hub bearings are mounted on the knuckle journal to support the hub; The inner hole wall of the knuckle shaft neck is press-fitted with a bushing to support the outer half shaft. The upper and lower ends of the steering knuckle housing are respectively provided with the thick part of the upper and lower two segments of the kingpin, and the stop pin is stopped. The upper end of the steering knuckle housing is provided with a steering knuckle arm, and the lower end of the steering knuckle housing is provided with a lower cover. After the grease is injected by the upper and lower nozzle, it enters the central oil channel of the kingpin respectively, and then comes out from the two side holes into the kingpin and the bushing to achieve lubrication. When the car is steering, the steering lever pulls the steering knuckle arm to drive the steering knuckle to swing around the kingpin, then the steering wheel can be subsequently deflect, so as to realize the steering of the car.
This article by Guangxi South light vehicle bridge auto parts Co., LTD
This article by Guangxi South light vehicle bridge auto parts Co., LTD
Copyright 2021 Guangxi Nanqing Axle Auto Parts Co., Ltd. © All rights reserved